Physical Cleaning:
1. Wipe with a dry cloth: first use a dry soft cloth to gently wipe off the mold spots and mold on the surface of the solid wood. When wiping, be careful to follow the texture direction of the wood to avoid back and forth friction damaging the solid wood surface.
2. Soft bristle brush brush: For more stubborn mold spots, you can use a soft bristle brush to brush. Choose a brush with soft bristles and gently brush the mold spots, pay attention not to excessively force to avoid scratching solid wood.
Chemical treatment:
1. White vinegar solution: Mix the white vinegar and water in a ratio of 1:1, put it into a watering can, spray it on a moldy place, and then wipe it with a clean rag. White vinegar has the effect of sterilization and disinfection. When using white vinegar solution, let it stay in the moldy area for a few minutes to enhance the sterilization effect.
2. Alcohol wipe: Wipe the moldy area with alcohol at a concentration of about 75% can effectively remove mold. Alcohol is highly volatile and will dry quickly after wiping. When using it, you can wipe it with a cotton ball or gauze dipped in alcohol.
3. Special mold removal agent: There are special wood mold removal agents on the market. Used according to the instructions can more effectively remove mold and prevent mold from becoming mold again. Before using a special mold removal agent, it is recommended to test it in small and inconspicuous areas to ensure that it will not adversely affect solid wood.
Ventilation and drying:
Place solid wood furniture in a well-ventilated place to dry naturally to inhibit the growth of mold. You can open windows to increase air circulation, or use a fan to accelerate air circulation. However, avoid placing it directly on the air outlet to prevent the wood from deforming.
Bathing in the sun:
If solid wood furniture can be moved, move it outdoors to bask in the sun when the sun is mild, but avoid long-term exposure to the sun to avoid cracking the wood. When basking in the sun, pay attention to turning over so that all parts can fully receive sunlight.
In short, removing mold from solid wood requires patience and care, and pay attention to subsequent maintenance and protection. Through the correct treatment method, solid wood furniture can be restored to its original state.
